Forums | Conexant (Public) | V90 56K modem weird bahaviour | Watch |
Author | Topic |
e28makaveli Tl Posts: 3 Canada | Posted - 5/31/2007 1:22:54 PM I have two V90 56K modems that will not connect, until I force the modulation to V22 or B212. With both modems configured for V22, the RxD LED on the initiating modem continues to flash repeatedly, after the connection has been established, with out with no data being transferred between the DTE's. Any comments? |
v.Richard Tl Posts: 6222 USA | Posted - 6/3/2007 12:57:21 AM You should be able to connect with V.32 modulation. Sounds like the V.22 connection is in an error condition. Are you using regular phone lines of decent quality at both ends? Aloha! Richard. |
e28makaveli Tl Posts: 3 Canada | Posted - 6/20/2007 7:25:23 AM Yes, phone lines are of decent quality. |
v.Richard Tl Posts: 6222 USA | Posted - 6/25/2007 8:05:55 PM So make sure both modems have the same error correction protocol enabled and that the connection is with error correction. Aloha! Richard. |
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums |